Trenz Electronic GmbH

Carrier board for TEM0007 Microchip PolarFire SoC module  (TEB2000-01-T001)

The carrier board may only be used in conjunction with the TEM0007.


Numero di variazione (MEPA): VAR-827003115

Codice produttore: TEB2000-01-T001

Codice doganale:


Disponibile per la spedizione immediata: 0

Tempo di elaborazione 3 giorni. Per gli ordini con un valore netto totale inferiore a 70 euro, verrà applicata una tassa di elaborazione di 15 euro.

Articolo situato in e spedito da: Riedlingen, Germania


172,57 EUR *
Contenuto 1
Effettua il login e ottieni prezzi migliori. Oppure contattateci e richiedete lo stato B2B..

* IVA Excl. escl. Costi di spedizione

The Trenz Electronic TEB2000 carrier board provides functionality for development, evaluation and testing purposes of Trenz 4 x 5 cm SoMs (System on Module).

The carrier board is equipped with a broad range of various components and connectors for different configuration setups and needs. On-module functional components and multipurpose I/Os of the SoM's logic are connected via board-to-board connectors to the carrier board components and connectors for easy user access.

See page "4 x 5 cm carriers" to get information about the SoMs supported by the TE0703 carrier board.

Key Features

  • On Board
    • System Controller (SC) (LCMXO2-1200HC-4TG144I1))
    • Mini USB for JTAG and UART connection (FTDI FT2232H)
    • Mini USB second UART connection (FTDI FT230XQ)
    • SDIO port expander
    • 4 x User LEDs
      • D1, D2 connected to SC (firmware-dependent functionality)
      • D3, D4 connected to SC and 4 x 5 SoM
    • 2 x User push button
      • Connected to SC (firmware-dependent functionality)
      • Currently used for Hard- and Soft-Reset
    • 4 User DIP switches
      • Enable/disable update of the SC
      • MIO0 (accessible signal by SC and SoM)
      • 2 "mode" bits

  • Interface
    • Trenz 4 x 5 SoM socket
      • 3 x Samtec LSHM series high-speed connectors
    • Micro SD card connector
    • 2 x VG96 backplane connectors assembly option (mounting holes and solder pads)
    • Mini or Normal USB for SoM USB-OTG connection (depends on assembly variant)
    • RJ45 GbE connector

  • Power
    • Overvoltage-, undervoltage- and reversed- supply-voltage-protection
    • Barrel jack (2.1 mm) for 5V power supply input

  • Size
    • 10 x 6.45 cm

Scope of Delivery

  • 1 x TEB2000-01-T001 Carrier board for TEM0007 Microchip PolarFire SoC module 

Note: VG96 Connector vertical (article 21545), Harting DIN41612 (female) is not included in the scope of delivery, but can be purchased as an accessory in the shop.

Info: M2.5x8 mm screws and M2.5 galvanized nuts are required for mounting the VG96 connector.

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

ID articolo 102663
Condizione
ID della variazione 3941
Modello TEB2000-01-T001
Produttore Trenz Electronic GmbH
Paese di produzione
Contenuto 1 undefined
Peso 800 g
Peso netto 800 g