Trenz Electronic GmbH

TE0706 - Carrierboard for Trenz Electronic Modules with 4 x 5 cm Form Factor (TE0706-04-A)

Simple carrier board for Trenz Electronic 4 x 5 modules. Mainly for the TE0820/TE0720/TE0715 modules


Numero di variazione (MEPA): VAR-827003062

Codice produttore: TE0706-04-A

Codice doganale:


Disponibile per la spedizione immediata: ${ $store.getters.currentItemVariation.stock.net }

Tempo di elaborazione 3 giorni. Per gli ordini con un valore netto totale inferiore a 70 euro, verrà applicata una tassa di elaborazione di 15 euro.

Articolo situato in e spedito da: Riedlingen, Germania


127,94 EUR *
Contenuto 1
Effettua il login e ottieni prezzi migliori. Oppure contattateci e richiedete lo stato B2B..

* IVA Excl. escl. Costi di spedizione

The predecessor of this article is TE0706-04. All changes are in the Product Change Notification (PCN).

The TE0706 carrier board provides functionalities for testing, evaluation and development purposes of Trenz Electronic 4 x 5 cm SoMs. It is mainly for the use with TE0820, TE0720 and TE0715 modules. The carrier board is equipped with various components and connectors for different configuration setups and needs. The interfaces of the SoMs functional units and PL I/O-banks are connected via board-to-board connectors to the carrier board's components and connectors for easy user access.

See page "4 x 5 cm carriers" to get information about the SoMs supported by the TE0706 carrier board.

Key Features

  • 3 x Samtec LSHM series board to board connectors
  • VG96 connector (mounting holes and solder pads) and 50-pin IDC male connector socket for access to PL I/O-bank pins
  • USB2.0 type A connector, or optionally Micro USB 2.0 connector
  • 1 x RJ45 GbE MagJack, connected via MDI to B2B connector
  • 1 x GbE PHY, providing Ethernet interface in conjunction with RJ45 GbE MagJack
  • 4A High-Efficiency Power SoC DC-DC Step-Down Converter for 3.3V power supply
  • XMOD JTAG-/UART-header JX1
  • 1 x TE0790, XMOD FTDI JTAG Adapter - AMD/Xilinx compatible (pre-assembled)
  • Micro SD card socket
  • SDIO port expander with voltage-level translation and jumper for selection of SDIO voltage on SoM side
  • DIP-switches S1 to set SoM's control signals
  • 1 x user-push button, by default configured as system reset button
  • 3 x VCCIO selection jumper to set SoM's PL I/O-bank voltages
  • 5V power supply barrel jack
  • Size: 64.5 x 100 mm

Scope of Delivery

  • 1 x TE0706-04-A carrier board for Trenz Electronic modules with a form factor 4 x 5 cm
  • 1 x TE0790-04, XMOD FTDI JTAG Adapter - AMD compatible (pre-assembled)

Note: VG96 Connector vertical (article 21545), Harting DIN41612 (female) is not included in the scope of delivery, but can be purchased as an accessory in the shop. (https://wiki.trenz-electronic.de/display/PD/PCN-20231106+TE0706-03+BOM+Change)

Info: M2.5x8 mm screws and M2.5 galvanized nuts are required for mounting the VG96 connector.

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

ID articolo 102610
Condizione
ID della variazione 3890
Modello TE0706-04-A
Produttore Trenz Electronic GmbH
Paese di produzione
Contenuto 1 undefined
Peso 118 g
Peso netto 118 g